cecotec Conga 1090 Connected - Scrubbing Mode Details; Spot and Edge Cleaning; Room Cleaning and Suction Power

34 | CONGA 1090
ENGELSK
power levels: Turbo, Normal and Eco.
Fig. 32
Scrubbing intensity levels function
Press the scrubbing levels button on the remote control to adjust the wa-
ter level during the scrubbing process. There are 3 water levels: High, Me-
dium or Low.
Magnetic Strip
Use the magnetic strip included with Conga 1099 to delimit the cleaning
area so the robot is not able to access to certain areas.
Cleaning scheduling
This robot includes schedule settings in order for you to customize the
cleaning cycles. The robot can only be scheduled through the remote con-
trol or through the App (only models that feature App).
Note: Make sure the remote control is close to the robot when setting the
clock or scheduling cleaning cycles.
Setting the remote control’s time
Press the clock button on the remote control. Digits will start blinking.
Select the current day of the week by pressing the upwards and down-
wards buttons.
Fig. 33
Use the left and right buttons to set minutes and hour. Use upwards and
downwards buttons to change the digit while it blinks.
Fig. 34
Finally, press the power or the clock button. The robot will beep when the
time settings have been conrmed.
Fig. 35
Setting cleaning schedule
For a better and more comfortable cleaning, the robot includes a schedule
function to set daily schedules through the remote control or the App in
those Conga models that include app. In accordance to the conguration,
the robot will automatically start cleaning the selected days at the desired
time.
The time options on the remote control are: 12:00 a. m.–11:59 p.m. and 12:00
p.m.–11:59 p.m.
Before setting the time and the robot conguration, make sure the robot’s
power switch is on and that the power button on the robot is lit up.