To Next Page
J
James DelgadoAug 4, 2025
What to do if my Cecotec Vacuum Cleaner has a Wi-Fi connection failure?
- SSamantha KellerAug 5, 2025
If your Cecotec Vacuum Cleaner fails to connect to Wi-Fi, check your Wi-Fi connection and try connecting again.
What to do if my Cecotec Vacuum Cleaner has a Wi-Fi connection failure?
If your Cecotec Vacuum Cleaner fails to connect to Wi-Fi, check your Wi-Fi connection and try connecting again.
What to do if my Cecotec Vacuum Cleaner indicates a low battery?
If your Cecotec Vacuum Cleaner shows a low battery, charge the robot.
What to do if my Cecotec Vacuum Cleaner shows a left wheel error?
If your Cecotec Vacuum Cleaner displays a left wheel error, check if the wheel or brush is entangled or blocked, and then clean it.
What to do if my Cecotec Vacuum Cleaner reports a left side anti-collision sensor error?
If your Cecotec Vacuum Cleaner reports a left side anti-collision sensor error, clean or unblock the front bumper.
What to do if my Cecotec Vacuum Cleaner reports a left side free-fall sensor error?
If your Cecotec Vacuum Cleaner reports a left side free-fall sensor error, place the robot on a flat, stable surface.
General| Model | Conga 1590 Active |
|---|---|
| Category | Robot Vacuum Cleaner |
| Suction Power | 1400 Pa |
| Filtration System | HEPA filter |
| Mop Function | Yes |
| Water Tank Capacity | 200 ml |
| Battery Type | Lithium-ion |
| Battery Capacity | 2600 mAh |
| App Control | Yes |
| Programmable | Yes |
| Noise Level | 65 dB |
| Connectivity | Wi-Fi |
| Auto Recharge | Yes |
| Scheduling | Yes |
| Operating Modes | Auto, Spot, Edge |
| Voice Control | Yes |
| Suitable for | Hard floors |
| Virtual Walls | Yes |
Steps for installing the main brush and its cover onto the robot.
Procedures for inserting the dust tank and wet&dry tank into the robot.
Details on the robot's touch display and indicator lights for status monitoring.
Instructions for placing the robot on the charging base and connecting it correctly.
Using the remote control for ON/OFF, Standby, and Sleep functions.
Adjusting water intensity, suction power, and timer settings for cleaning.
Manual movement with direction buttons and initial setup for cleaning schedules.
Confirming, cancelling, or checking scheduled cleaning tasks.
Description of the automatic cleaning cycle using Gyro, Edge, and Random modes.
Details on Edge, Area, and Random cleaning patterns and their behavior.
Explanation of Twice and Scrubbing modes, including water intensity adjustments.
Information on Gyro, Manual, and Back Home modes for specific cleaning needs.
Procedures for cleaning side brushes and emptying the dust tank/filters.
Cleaning robot sensors, wheels, and charging terminals for optimal performance.
Instructions for disassembling and cleaning the main brush kit components.
