cecotec Conga 1590 Active - Safety Instructions

ENGLISH
24
Charging docking
1
4
3
2
1. Charging socket
2. Charging base top cover
3. Charging base middle cover
4. Charging terminals
Remote control
1
2
3
4
5
8
7
6
1. LED display
2. Back home
3. Direction buttons
4. Power level
5. Water intensity/time settings
6. Schedule
7. On/off button
8. Mode (only operates from standby mode)
Battery
• The remote control requires 2 x AAA-type batteries.
• If the remote control is used near the charging base, the device might not recognize the
command.
• Remove the batteries from inside the remote control if the robot is not going to be used
for a long time.
2. SAFETY INSTRUCTIONS
Read these instructions thoroughly before using the appliance.
Keep this instruction manual for future reference or new users.
• This product must be used in accordance with the directions
in this instruction manual. Cecotec cannot be held liable or
responsible for any damages or injuries caused by improper
use.
• Make sure that the mains voltage matches the voltage
stated on the rating label of the appliance and that the wall
outlet is grounded.
• This product can only be disassembled by qualied
personnel.