cecotec CONGA GRASSHOPPER 800 CONNECTED - Page 134

CONGA GRASSHOPPER 500 CONNECTED
134
ENGLISH
E11 The mower does not receive a
signal from the boundary wire
1. When the mower is inside
the working area, check the
colour of the indicator light
on the charging station. If
it is red, it means that the
boundary wire is not properly
connected to the charging
station.
2. If the cable is properly
connected, but the indicator
light is still red, check that
the cable is not broken.
3. If the error still appears
on the display, contact the
ocial Cecotec Technical
Support Service.
E12 Battery problem
Contact the ocial Cecotec
Technical Support Service to
change the battery.
E13 Charging problem
1. Check that the charging head
is clean.
2. If the error still appears
on the display, contact the
ocial Cecotec Technical
Support Service.
E14
The working area is too large 1. Reduce the size of the
working area. Follow the
instructions on this manual.
2. If the error still appears
on the display, contact the
ocial Cecotec Technical
Support Service.
EE
Unknown error
1. Restart the mower.
2. If the error still appears
on the display, contact the
ocial Cecotec Technical
Support Service.