cecotec CONGA GRASSHOPPER 800 CONNECTED - Page 133

CONGA GRASSHOPPER 500 CONNECTED
133
ENGLISH
E8 The mower has problems
connecting to the charging
station
1. Check whether one metre
of straight (unobstructed)
boundary wire is laid in front
of the charging station.
2. Check if the charging station
has been placed on a at
surface.
3. Check that the charging
station is not bent.
4. If the error still appears,
contact the ocial Cecotec
Technical Support Service.
E9 The mower is stuck
1. Position the mower in an
area where there are no
obstacles.
2. If the error still appears,
contact the ocial Cecotec
Technical Support Service.
BP The battery protection system
has been activated
1. Check the battery
temperature. If it is too high,
wait until it cools down. If
it is too low, wait until the
temperature rises above 5 °C.
2. If the error still appears
on the display, contact the
ocial Cecotec Technical
Support Service.