Why has my cecotec CONGA ROCKSTAR 2500 TITANIUM ERGOWET lost suction and is making noise?
If your Cecotec Vacuum Cleaner's suction power has decreased and it's making a lot of noise, it could be due to a full dust tank, a filter with too much dust, or an obstruction in the electric rotary brush inlet. You should clean the dirt, clean or replace the filter, and clean any dust inside the electric rotary brush.
How to fix a Cecotec Vacuum Cleaner when the motor doesn't operate?
If your Cecotec Vacuum Cleaner's motor isn't operating, it could be due to a dead battery or parts not being assembled correctly. Charge the vacuum cleaner and ensure all parts are correctly assembled.
Why does my Cecotec Vacuum Cleaner have short operating time after charging?
If your Cecotec Vacuum Cleaner isn't operating for very long after charging, it could be because it hasn't been charged for long enough or the battery is old. Fully charge the battery following the instructions in this manual. Batteries are easily recycled.
General| Model | CONGA ROCKSTAR 2500 TITANIUM ERGOWET |
|---|---|
| Category | Vacuum Cleaner |
| Battery | Lithium-ion |
| Charging Time | 4-5 hours |
| Filtration System | HEPA |
| Filter | HEPA filter |
| Cord Length | Cordless |
| Technology | Cyclonic |
| Dust Capacity | 0.6 L |
| Modes | 3 |
Step-by-step guide to connect the vacuuming brush head to the tube.
Instructions for attaching the vacuuming tube assembly to the main body.
How to properly insert the battery into its slot.
Explains usage as handheld or upright and speed settings (LOW, MED, HIGH, AUTO).
Details on using the brush head, adjusting suction, and auto-switching features.
Procedures for cleaning filters and emptying the dust tank.
Checks for power, assembly, and battery issues when the motor does not work.
Solutions for reduced suction, focusing on blockages in filters or tanks.
To Next Page