Why is the suction power level very low on my cecotec CONGA ROCKSTAR?
If the suction power of your Cecotec Vacuum Cleaner is very low, it could be due to several reasons. First, check if the dust tank is full and empty it if necessary. Secondly, the filters might be dirty or blocked, so clean or replace them. Lastly, inspect the air inlet of the vacuuming tube or suction base for any blockages and clean any dirt attached to the brush.
What to do if the operating time after charging has decreased on my cecotec CONGA ROCKSTAR?
If your Cecotec Vacuum Cleaner's operating time has decreased after charging, it could be due to insufficient charging. Make sure to charge the battery completely. Alternatively, the battery might be damaged or too old, in which case you should replace it.
How to fix a cecotec CONGA ROCKSTAR Vacuum Cleaner when the motor does not operate?
If the motor of your Cecotec Vacuum Cleaner does not operate, it could be due to a lack of battery charge. Charge the vacuum cleaner. Alternatively, the vacuuming tube, brush, battery, suction base, or handheld vacuum cleaner might not be assembled correctly. Check that all components and the handheld vacuum cleaner are assembled correctly.
What does it mean if my cecotec CONGA ROCKSTAR Vacuum Cleaner has a flashing red and green light?
A flashing red and green light on your Cecotec Vacuum Cleaner indicates that the charger is not properly connected to the mains. Connect the charger to a power socket.
Why is the battery of my cecotec CONGA ROCKSTAR Vacuum Cleaner not charging?
If the battery of your Cecotec Vacuum Cleaner does not charge, check the connections and the wall socket.
General| Bagged or Bagless | Bagless |
|---|---|
| Suction hose length | Not applicable |
| Tube length | Not applicable |
| Battery type | Lithium-ion |
| Filters | HEPA |
| Cord length | Cordless |
Handle Li-ion batteries with care; avoid high temperatures, leaks, and short circuits. Charge fully before first use and periodically during storage.
Instructions for correctly inserting the battery into the handheld unit and attaching the vacuuming tube.
Guidance on how to attach and detach the dust tank from the main unit, including unlocking mechanisms.
Final steps to connect the assembled suction base and tube to the handheld vacuum cleaner unit.
Details the operation of the handheld unit, including power button functions and mode selection.
Describes how to operate the vacuum cleaner in its upright configuration, including power modes and Auto mode activation.
Introduces various accessories and their suitability for different cleaning tasks and surfaces.
Details the Jalisco brush, its design for hard floors, and its protective features against tangles and damage.
Describes the silicone and bristles brush, ideal for cleaning carpets and pet hair.
Explains the use of the wide brush for cleaning furniture and hard-to-reach corners.
Explains the use of the narrow brush for cleaning furniture and hard-to-reach corners.
Information on the wall bracket for hanging the vacuum and storing accessories.
Explains the two methods for charging the device and the battery indicator lights and their meanings.
Details how to empty and clean the dust tank, including removal and rinsing procedures.
Instructions on how to remove, wash, and dry the vacuum cleaner's filters to maintain efficiency.
Recommendation for cleaning the Jalisco brush to prevent tangles and blockages, including washing and drying.
To Next Page