EasyManua.ls Logo

cecotec FORCECLIMA 7400 SOUNDLESS TOUCH - Timer Functionality; Water Tank Management; Equipment Labelling and Recovery Procedures

cecotec FORCECLIMA 7400 SOUNDLESS TOUCH
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FORCECLIMA 7400 SOUNDLESS TOUCHFORCECLIMA 7400 SOUNDLESS TOUCH
6564
ENGLISH ENGLISH
1.2. Work procedure
The work must be carried out in accordance with a controlled procedure to minimise the risk of

1.3. General workspace
All maintenance personnel and others working in the area should be briefed on the nature

workspace should be divided into sections. Ensure that conditions within the workspace are

1.4. Refrigerant verication
The area should be checked with an appropriate refrigerant detector before and during



1.5. Presence of re extinguishers
              
          

1.6. Absence of ignition sources
No person carrying out work related to a refrigeration system involving the exposure of piping
         

cigarette smoking, should be kept far enough away from the installation, repair, pick-up, and


danger or risk of ignition is present. “No Smoking” signs must be displayed.
1.7. Ventilation
 
or carrying out any work at high temperature. Proper ventilation must be kept at all times
during work. Ventilation should safely disperse any refrigerant released and preferably expel
it externally to the atmosphere.
1.8. Verication of refrigeration equipment
         

times. In case of doubt, refer to the manufacturer’s technical department for assistance.

The cooling

good.
There is direct sunlight. Pull the curtain.
Doors or windows are


there are other sources of
heat.
Close doors and windows.
 
The air inlet or outlet is
blocked.
Clear obstructions.
The device
makes a lot
of noise.
The air conditioning is not



Compressor
does not
work.
There is frost. 
lowered, and then restart the appliance.
Protection against
overheating system is
activated.
The remote
control does
not work.
There is too much distance
between the machine and
the remote control.
Let the remote control get close to the
air conditioning, and make sure that
the remote control directly faces to the
direction of the remote control receiver.
The remote control is not
aligned with the direction
of the remote control
receiver.
Batteries are dead. Replace batteries.
Displays ‘E1’. The room temperature
sensor is abnormal.

Service of Cecotec.
The display
shows “E2”.
The pipe temperature
sensor is abnormal.

Service of Cecotec.
1. Service information
1.1 Area verication
          
necessary to ensure that the risk of ignition is minimised. Before repairing the cooling system,
the following precautions must be observed:

Table of Contents

Related product manuals