To Next Page

To Previous Page

3. OPERATION

• Before using the fan make sure that it is on a flat and stable surface. Damage may occur if

it is placed on an unstable or uneven surface.

• Set all the switches to OFF position, then insert the plug directly into a standard socket-

outlet. Make sure the plug fits tightly into outlet.

1. Press the button to start and turn off the fan, the default mode setting is normal and

the default speed setting is 18.

2. Press the button to select the desired air mode: Breeze, Eco, Night and Normal. The air

mode selected will activate the according light indicator.

3. Set the timer by pressing the button to select the desired operating time, the range is

from 1 to 18 hours. The pilot light corresponding to the selected operating time will light up.

4. For a greater air flow, press the ; to stop oscillating, just press this button again, the

pilot light will turn off.

Rotate the control knob beside the control panel, you can change the fan speed. Rotate the knob

clockwise to increase the speed, and rotate the knob anti-clockwise to decrease the speed.

Note: all above functions can be operated from the remote control.

4. CLEANING AND MAINTENANCE

1. Always remove the plug from the socket-outlet and allow the fan to stop operating before

clean it.

2. Clean the external surfaces of the fan with a soft damp (not dripping wet) cloth.

WARNING:

• Do not immerse the fan in water.

• Do not use any cleaning chemicals such as detergents and abrasives.

• Do not allow the interior (special for the PCB) to get wet as this could create a hazard.

3. When the unit is not in use, make sure that it is unplugged from the wall socket. To store the

fan, you may pack it in the original carton and store it in a cool and dry place until later use.

4. In case of malfunction or doubt, do not try to repair the fan yourself, it may result in a fire

hazard or electric shock.

5. TECHNICAL SPECIFICATIONS

Product reference: 05211/05212

Model: ForceSilence 1030/1040 SmartExtreme

28 W, 220-240 V~50/60Hz

Made in China | Designed in Spain

cecotec ForceSilence 1030 SmartExtreme User Manual

Questions and Answers: