44
ENGLISH
HYDROBOOST 10200 LIBERTY PRO
the hose.
Remove the battery and store it separately if the device is not going to be used for a long time.
6. TROUBLESHOOTING
Problem Cause Solution
ECO indicator light ashes. Low battery. Charge the battery.
The device won’t turn on. Low battery. Charge the battery.
Sudden power outage. Temperature too high,
overheating protection.
Turn the device again
once the temperature is
lower.
Low water content. Filtering blockage that leads
to a poor water intake.
Clean the water inlet’s
lter and the water inlet.
Inlet hose bent. Replace or straighten the
inlet hose.
Water contains impurities Replace the water.
The device does not absorb
the water
Water inlet’s leakage. Tighten the inlet’s joint.
Poor connection between
water inlet and water inlet’s
connector.
Reassemble the inlet and
outlet accessories.
The water inlet’s lter is not
correctly assembled.
Assemble it correctly.
The device takes longer to
absorb water.
Device on Energy-saving
mode.
Deactivate ECO mode and
switch to normal mode.
Multi-function nozzle leaks. Multi-function nozzle is not
correctly assembled.
Insert the multi-function
nozzle in the device and
then rotate it.
Multi-function nozzle leaks. The nozzle is not correctly
assembled.
Rotate the nozzle to the
indicating mark.
To Next Page
Loading...
