12
HYDROBOOST 2400 ADVANCECLEAN
• WARNING: always turn o the power disconnect switch
when leaving the appliance unattended.
• Ensure that the mains voltage matches the voltage specied
on the product rating label and that the plug is earthed.
• Always unplug the power supply before disassembling or
repairing the device.
• Make sure that the safety devices are working properly
before using the device. Do not remove or modify any parts
of the trigger gun or the product itself.
• It is very important to know how to stop the appliance and
release the pressure quickly before using it, and to become
thoroughly familiar with its operation.
• Stay alert to what you are doing during operation.
• Do not operate the machine when fatigued or under the
inuence of alcohol or drugs.
• Do not use the device if its cord or any of its parts are
damaged, e.g., the safety elements, the high-pressure
hose, or the trigger of the gun.
• Make sure there are no persons in the area where the
device is to be used.
• Do not tilt your body to reach the product or stand on an
unstable support. Always keep good balance.
• Follow the maintenance instructions specied in this manual.
• Make sure the product is placed on a stable surface
during operation, transport, assembly, or disassembly. Be
careful when moving it from one place to another to avoid
damaging it.
• In the event of an accident, switch o the appliance and
disconnect it from the mains immediately.
• Keep the nozzle of the device clear.
• Always wear safety goggles and protective clothing
when using or repairing the product. The use of hearing
protection is also recommended.
08139_HydroBoost 2400 AdvanceClean.indd 1208139_HydroBoost 2400 AdvanceClean.indd 12 18/11/22 9:5718/11/22 9:57
To Next Page
Loading...
