HYDROSTEAM 2030 ACTIVE 19
ENGLISH
Press the ON button.
The pressure indicator light will illuminate.
The appliance is ready to emit steam when this indicator light changes from orange to green.
Remove the steam safety lock and press the steam On/O button positioned on the pistol
handle to generate steam.
After use, press the steam button for a few seconds to remove any residual condensation
water in the main hose.
Using the accessories:
Use it with the mop cloth.
The big nozzle can be used with or without the extension tubes. The concentrated steam jet
increases the cleaning power to remove any encrusted dirt.
The round nylon brush connects to the big nozzle. It is suitable for cleaning small,
very soiled surfaces and bathrooms.
Note: On cold windows, pre-heat the surface initially by spraying the steam thirty
centimetres
away from the glass.
Filling the water tank during use
Always wait for the appliance to stop generating steam and ensure that the device is no
longer
safety
Filling methods: Press the steam generator button to spray the steam until the device is
empty.
Release the control and open the safety button. Steam may be released on opening.
Fill the water tank.
Cleaning
Wait for the steam to take eect and check that there is no colour change or deformity.
Switching o the device
Place the On/O button in the O position.
Unplug from the electric socket, leave the appliance to cool and put away.
To Next Page
Loading...
