HYDROSTEAM 2030 ACTIVE18
ENGLISH
2. BEFORE USE
Take the product out of the box.
Remove all packaging materials, rating labels and transport protectors before plugging the
device. Keep the original box.
Make sure all parts and components are included and in good conditions. If any visible signs
of damage are observed, contact Cecotec’s Technical Support Service immediately.
Note:
Steam or steam pressure may loosen, detach, discolour, deform or melt the surface to be
cleaned.
Always check the heat and humidity resistance of the material to be cleaned by carrying out a
preliminary test on a hidden surface.
3. OPERATION
Attaching accessories
Attach the accessories to the pistol handle or one or two extension tubes.
Filling the water tank
Suitable water: Tap water, demineralised water or distilled bottled water.
Always use clear, pure water.
To ensure the long-life of your appliance, we recommend that you use mix tap water and
Never use pure demineralised water, water collected from a tumble drier or water softener or
rainwater.
Release the safety button from the water tank.
Replace the water tank safety button.
Note: The safety button will not open when there is pressure in the device.
You must remove any steam or leave the appliance to cool before opening.
Warning:
Do not point the jet of steam in the direction of any person, animal. electrical plugs,
Do not change the attachments whilst the appliance is emitting steam.
Using the device
Plug the appliance into a power supply.
To Next Page
Loading...
