cecotec Juice&Live 3000 EasyClean - Troubleshooting

Unusual smell during rst uses. Products from manufacturing could
result in unusual smells during rst
uses.
If the smell remains after
several uses, contact the
Technical Support Service of
Cecotec.
The device does not juice pro-
perly.
Too much food or introduced too
fast.
Introduce food more slowly
and do not push it too hard.
Too much pulp or skin in the juice. • Filter damaged.
• The lter is not being used proper-
ly, for example, the soft fruits lter
is being used to squeeze hard fruits.
Change the lter.
Unusual vibration or noise.
• Incorrect installation of screw
support or lter damaged.
• Motor is damaged.
• Install the screw support
correctly or change the
lter.
• Contact the Technical Su-
pport Service of Cecotec.
Leakage from the body.
The silicone element is not assem-
bled below the juice collector.
Install the silicone element
below the juice collector.
The food inlet tube does not t
into place.
The lter or screw support is not
installed correctly.
Install the lter and the
screw support in their right
position according to the
instructions.
04135_Juice&Live 3000 EasyClean.indd 41 1/10/19 12:26
7. TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The device doesn’t work when
connected to the power supply
and pressing the power button.
• Power plug not inserted properly.
• The device has been operated for
too long and has activated safety
system.
• Components are not installed
correctly.
• Connect the machine to
the power supply.
• Allow the machine to rest
and restart it after 20 min.
• Install all the components
correctly.
29
JUICE&LIVE 3000 EASYCLEAN
ENGLISH