cecotec MAMBO COOKING VICTORY - Settings Menu Configuration; Manual Control Menu Operation; Scale Functionality Usage; Favourite Recipes Management

MAMBO COOKING VICTORY_UNIQUE_TOTAL GOURMET
87
ENGLISH
Settings
This menu contains the Wi-Fi settings to make the connection to Wi-Fi or mobile app, to
download and link to the application, for pending updates, to select a language, show the
number of recipes downloaded, get help, and adjust the screen brightness.
Manual control
This menu will prompt you to place a jar rst, so that the cooking robot will detect which jar it
is, and show you which accessories you want to put in. Then, select the accessory to be used
and nally set the cooking settings as you wish. The robot will take a few seconds to allow
you to open the cover for your safety.
Scale
This menu will display the scale. Wait a few seconds for it to become available and weigh
the food you want. To reset the counter to 0, press the Tare button. The maximum limit of the
scale is 5 kg.
Favourite recipes
This menu will show the favourite recipes that you have saved, so when you start or nish a
recipe, click on the heart icon to save that recipe in favourites.
5.2. Mambo recipes
- In the recipe menu you will select a recipe you wish to prepare. The display will show a
short description of diculty, time and allergens. Three icons appear at the top right, one
icon for downloading the recipes, one for adding notes and one for saving the recipe in
favourites.
- Dragging to the left once will show you the ingredients; dragging a second time, will show
you the full breakdown of steps that take place during the recipe.
5.3. ChefCrown dispenser recipes
- In the menu of recipes with dispenser you must select a recipe you want to prepare. The
display will show a short description of diculty, time and allergens. Three icons appear
at the top right, one icon for downloading the recipes, one for adding notes and one for
saving the recipe in favourites.
- Dragging to the left once will show you the ingredients; dragging a second time, will show
you the full breakdown of steps that take place during the recipe.
- First of all, we must place the corresponding jar and accessory. In the next step, it will
show us the amount of ingredients that we must add to the jar. Once these ingredients
have been introduced, we install the dispenser and select whether we want the robot to
keep the food warm at the end of the recipe. The next tab will show you an outline of the
containers where you should add the ingredients. Click on the containers to see what you
have to add. When you have added the ingredients, you can press the “Check” button on
the right-hand side of the display. (Fig. 22)