cecotec MAMBO COOKING VICTORY - TROUBLESHOOTING; Locking System and Jar Positioning Errors; Content Exceeded and Temperature Errors; Motor Overheating Troubleshooting

96
ENGLISH
7. TROUBLESHOOTING
Warning code Description Possible cause Possible solution
A01 warning
Locking system.
The jar or the jar’s cover are
not xed properly.
Re-assemble the jar and
jar cover, make sure all
the parts are assembled
properly and tightly and
try operating it again.
A02 warning Incorrectly
positioned jar.
The jar is not in its correct
position or connection of the
temperature sensor at the jar
base is damaged.
Re-assemble the jar
and make sure it is xed
properly.
A03 warning Content
exceeded.
There is too much food inside
the jar.
Remove some food
from inside the jar or
cut the food to smaller
pieces and restart the
cooking robot.
A04 warning
The
temperature is
too high.
There is no or very little
food in the jar and the set
temperature is too high for too
much time.
Add food in the jar.
A05 warning
The motor’s
temperature is
too high.
The cooking robot has been
operating with too much food
for a lot of time.
Stop operating the
cooking robot and allow
it to cool down before
restarting it again.