cecotec MAMBO COOKING VICTORY - Speed Setting and Ranges; Temperature Setting and Monitoring; Heating Power Setting and Recommendations; Heating Power Warning on Scorching

90
ENGLISH
Speed
- Press this icon in standby mode or during the cooking process. The appliance will enter
speed-setting mode. The signal on the display will ash. It will then be possible to adjust
the speed. Turn the knob clockwise to choose the desired speed.
- The speed range is from level 0 to 10 for Unique XL jar and 0 to 15 for Victory XL jar.
- If the timer has not been set, the cooking robot will operate with the pre-set times:
- Heating (without blending): max. 12 hours.
- Beat at speed 1-7: maximum 1 hour.
- Beat at speed 8-15: maximum 5 minutes.
- There is a speed transfer in the structure, so it is normal to hear a faint noise before the
motor starts running and in the shift between speeds 7 and 8.
Temperature
- Press this icon in standby mode or during the heating process. The appliance enters the
temperature setting mode. The signal on the display will ash. It will then be possible to
adjust the temperature. Turn the knob to select the desired temperature.
- Temperature range: 37-180 ºC.
- The device has a LED light that changes colour to indicate whether the jar is above 60
°C or not. For this purpose the robot will always show a blue light. If the temperature is
exceeded, it will show a red light.
Heating power
- Press this icon in standby mode or during the heating process. The appliance will enter
heating power setting mode. The signal on the display will ash. It will then be possible to
adjust the heating power. Turn the knob to select the desired heating power.
- The heating power range is from level 1 to 15 for Unique XL jar and 0 to 10 for Victory XL
jar.
- It will not work if the heating power is selected but the temperature is not. It is
recommended to follow the default settings when choosing dierent temperature levels.
Warning
Please note that the higher the heating power, the greater the amount of heat generated to
reach the preset temperature. This may inuence cooking as foods that are dry or low in
water may tend to burn and scorch the base of the jar.
ScreenBlock
Activating the ScreenBlock function (child lock): if you want to lock the display functions,
press the padlock icon at the top left of the main display. A POP UP will then appear asking
if you want to lock the display. If you want to lock, press OK and the display will turn o. To
unlock, touching the display or pressing the knob button will illuminate a “Swipe up to unlock”
icon (similar to how mobile devices work) and you can swipe up on the display to unlock.