EasyManua.ls Logo

cecotec MICROONDAS PROCLEAN 6010 - 1. Parts and Components; 2. Before Use

cecotec MICROONDAS PROCLEAN 6010
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PROCLEAN 6010
44
ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Door safety lock system
2. Microwave window
3. Rotating axis
4. Roller ring
5. Rotary plate
6. Control panel
7. Mica panel
Fig. 2
1. Start/Stop
2. Weight cooking
3. Weight defrost
4. Fast defrost
5. ON button
6. Timer button
7. Time cooking
8. Numbers
9. Preset programmes
10. Reset
11. Clock
12. Reheat
2. BEFORE USE
Never remove the mica plate.
Take the product out of the box. If the microwave has a protective lm, tear it o before
starting operation. Check carefully if there is any damage, and if there is, immediately notify
the Technical Support Service of Cecotec.
The product must be placed on a at, stable and dry place and kept away from corrosive
materials, heat and humidity, such as gas burners or water.
To ensure enough ventilation, minimum distances have to be kept:
From the back part to the wall: 10 cm.
From the side to the wall: 5 cm.
Free distance from the top surface: 20 cm.
From the microwave to the ground: 85 cm.
The product must be placed, at least, at 5 m from the TV, Radio or antenna.
The product must be placed in such way that the plug is accessible and must ensure an

Table of Contents

Related product manuals