cecotec ProClean 6110 - Cooking Modes and Power Levels

PROCLEAN 6110
10
Setting cooking time and power level
One-stage cooking
1. From the home display, use the number keys to enter the desired cooking time. The
cooking time can be from 1 second to 99 minutes and 99 seconds. If the desired
cooking time is more than 1 minute, enter numbers for both minutes and seconds.
For example: to set 20 minutes, enter 2, 0, 0, 0.
2. Press the power button and set the desired power level using the number keys.
3. Press the Start/Stop key to start operation.
Example: Cooking at P80 for 10 minutes.
Steps Display
1 After powering up, the display panel shows the colon sign.
Press the Reset button once or wait for 30 seconds.
:
2 Press the On button repeatedly to select he desired power level . 80P
3 Set the cooking time by pressing number keys “1”, “0”,“0”, “0”. 10:00
4 Press the Start/Stop button to start operation. The LED will display the
countdown.
Warning:
- The maximum programmable cooking time is 99 minutes, 99 seconds.
- It is recommended to turn or stir food at least once during the process.
- Press Reset button once to resume operation.
- If food is removed before the pre-set time, make sure you press Reset once in order to stop
operation and avoid the microwave from operating automatically and empty when closed.
- When operating at maximum power, the microwave will automatically lower power after
a certain time in order to lengthen the appliance’s shelf life.
Two-stage cooking
In order to obtain the best result, some recipes require of dierent steps. This function allows
you to personalise and to combine your cooking processes.
Example: Cooking food on microwave mode at 100 P, for 3 minutes,then 20P for 9 minutes.
Steps Display
1 Select 100 P microwave for 3 minutes.
1.1 The display shows colon, press, press the Reset key once or wait for 30
seconds.
:
1.2 Press ”3” “0”, “0” to set cooking time. 3:00