PROCLEAN 6110
9
Automatic cooking
Use this mode for multi-stage cooking. It allows cooking at dierent power levels at dierent
pre-set times, changing from one stage to another automatically.
Clock setting
- On standby state, press Clock key.
- Use number keys to enter the correct time. You must press at least three numbers to set
the clock (one for hour and two for minutes).
- Press the Clock key again to conrm time.
Warning:
The clock is 24 hours. When the microwave is rst plugged in or when power resumes after
a power interruption, the display panel will show ENTER, CLOCK, TIME. If you prefer not to
have the clock displayed, press the Reset key. You can check the clock time while cooking is in
progress by pressing the Clock key.
Example: Setting clock at 12:30
Steps Display
1 After powering up, the display panel shows the colon sign.
Press the Reset button once or wait for 30 seconds.
:
2 Press keys “1”, “2”, “3”, “0”. 12:30
3 Press the Clock key to conrm.
Setting timer
- You can use the timer function independently, even while the microwave is operating.
- Press the Timer button.
- Enter cooking time by pressing the number keys. The timer is set in minutes and seconds,
from left to right. The maximum cooking time is 99 minutes, 99 seconds.
- For example, to program:
1. 5 seconds: Press 5.
2. 24 minutes, 5 seconds: Press 2405.
3. Press the Start/Stop key to conrm.
Warning
The timer countdown can be seen in display for 3 seconds before it goes back to the stand by
mode.
Press Timer and then press Reset to cancel timer during countdown.
To Next Page
Loading...
Need help?
General
