PROCLEAN 9110 FULL INOX
48
ENGLISH
leave the microwave open to ensure good ventilation. In such case, it is recommended to
heat a glass of water at high power for several times.
Warning:
Never remove the mica panel.
3. OPERATION
Control panel
Fig.3
Before cooking
Connect appliance to power outlet. Once it is connected, the LED light will ash 3 times and will
show 1:00. Select a function.
Time/weight knob
Cooking time and food weight can be increased or decreased during operation, depending on
the mode, by turning the Time/Weight knob.
Pause/Cancel
- Before operation: Press once in order to reset settings and return to to initial stage.
- During operation: Press once in order to interrupt operation or press twice in order to
cancel pre-set cooking program.
Reminder
Once the pre-set cooking process is over, it will say END on the LED display panel and the
microwave will beep 3 times. Press Pause/Cancel button or open the microwave door in order
to stop the alarm, if not, the alarm will sound at an interval of 3 minutes.
Instant cooking
From the initial position, press the Start button, the microwave will automatically operate
at high power for 1 minute. Cooking time can be increased or decreased during operation by
turning the Time/Weight knob.
Clock/timer setting
Use the Defrost/Clock button to set the time (by holding down the button for 3 seconds) and to
set the Defrost mode (press once).
To Next Page
Loading...
Need help?
General
