34
READY WARM 5200 BOX CERAMIC
1. Press or to set the desired temperature, from 10 to 49 ºC.
2. Repeat steps 3 to 7 to set the desired number of periods.
3. Press OK to confirm settings.
4. Prees to exit the week scheduling mode, the symbol will turn off.
Checking settings:
• Press to check the scheduled day (d1-d7).
• Press to check the time periods (P1-P6).
• Press ON to check the set turn-on time.
• Press OFF to check the turn-off time.
SETTING OPEN-WINDOW MODE (ONLY REMOTE CONTROL)
1. Press to switch the appliance on.
2. Press on the remote control to active the open-window mode ( / will light up).
3. Press or to set the temperature of the open-window mode. (The default
temperature is 23 ºCC).
4. If a temperature decrease is detected, the appliance will automatically turn off. Press
to turn the product on again.
• Example: setting 23 ºC during open-window mode:
WARNING: when open-window mode and week scheduling mode are operated at the same
time, during the week scheduling mode’s off-period, the product will not work. While the week
scheduling mode is operated, the temperature will be subject to the open-window settings.
WARNING : before setting the week-scheduling mode, the current time and day must be set, if
not, the product will not operate.
To Next Page
Loading...
