Why is the suction power so low on my cecotec ROCKSTAR 700 ULTIMATE ERGOFLEX?
The suction power might be low on your Cecotec Vacuum Cleaner due to several reasons. First, the dust tank may be full, so you should empty it. Second, the filters could be dirty or blocked, requiring you to clean or replace them. Finally, the air inlet of the vacuuming tube or suction base may be blocked; in this case, clean the dirt attached to the brush.
What to do if my Cecotec Vacuum Cleaner motor does not operate?
If the motor of your Cecotec Vacuum Cleaner isn't working, there could be a couple of reasons. It might be that the battery is empty, so try charging the vacuum cleaner. Alternatively, the vacuuming tube, brush, battery, suction base, or handheld vacuum cleaner might not be assembled correctly. Ensure that all components and the handheld vacuum cleaner are properly assembled.
Why has the operating time decreased after charging my cecotec ROCKSTAR 700 ULTIMATE ERGOFLEX?
If the operating time of your Cecotec Vacuum Cleaner has decreased after charging, it could be due to a couple of reasons. First, the battery may not have been charged completely, so ensure you fully charge it. Second, the battery might be damaged or too old, in which case you should replace it.
What does it mean when the green and red light are blinking on my cecotec ROCKSTAR 700 ULTIMATE ERGOFLEX Vacuum Cleaner?
If you see a green and red light blinking on your Cecotec Vacuum Cleaner, it indicates that the charger is not properly connected to the mains. Make sure to plug the charger into a socket.
General| Brand | cecotec |
|---|---|
| Model | ROCKSTAR 700 ULTIMATE ERGOFLEX |
| Category | Vacuum Cleaner |
| Language | English |
Instructions for connecting the suction base to the vacuuming tube and disassembly.
Guide on inserting and securing the battery into the handheld vacuum cleaner.
Steps to attach the dust tank to the handheld vacuum cleaner.
Completing installation by connecting the vacuuming tube with suction base to handheld unit.
How to turn the handheld unit on/off, select power levels, and modes.
How to operate the upright vacuum, including modes and Auto Carpet feature.
Introduction to various accessories and their uses for different cleaning needs.
Details on using the Jalisco brush for hard floors and its protective features.
Information on using the motorised brush for cleaning upholstery.
Description of the brush for carpets and pet hair cleaning.
Guide on using the extensible tube to reach difficult areas.
Details on using wide and narrow 2-in-1 brushes for furniture cleaning.
Information on the union elbow for accessory connection and the long brush.
Instructions for mounting the wall bracket and storing accessories.
Explanation of the two available methods for charging the device.
Steps to empty and clean the dust tank after use.
Guidance on how to remove and clean the device's filters.
To Next Page