Cedar Summit F25630 - Page 28

1 x Left Access Rail FSC 2 x 4 x 62-7/8”
1 x Right Access Rail FSC 2 x 4 x 62-7/8”
4 x Ladder Tread FSC 5/4 x 4 x 13-3/4”
022
021
020
Fig. 2.1
Wood Parts Hardware
Step 2: Access Ladder / Rockwall Assembly
Part 1
A:Place(020)LeftAccessRailonlefthandsideof4(022)LadderTreadsand(021)RightAccessRailonright
handsidewiththegroovesfacingin.(g.2.1)
B:Fiteach(022)LadderTreadintogroovesonboth(020)and(021)AccessRails,makesurethetopedgeofthe
treadsareushtothefrontoftheAccessrails.(g.2.1and2.2)
C:Pre-drillpilotholeswitha1/8”drillbitandattachRailsandLadderTreadstogetherusing4(S3)#8x2-1/2”
WoodScrewspertread.(g.2.1)
Other Parts
2 x Swing Bracket
16 x #8 x 2-1/2” Wood Screw
2 x 5/16 x 1-3/8” Wafer Bolt
(5/16” at washer, 5/16” t-nut)
WB2
S3
Fig. 2.2
Fig. 2.3
020
021
022
022
Swing
Bracket
End View
WB2
5/16”Flat
Washer
5/16”T-Nut
Flush to
edges
021
D: AttachSwingBracketstotheinsidetopof(020)
and(021)AccessRailsatanglededgeusing1(WB2)
5/16x1-3/8”WaferBolt(withatwasherandt-nut)
perbracket.EdgeofSwingBracketisushwithedge
ofaccessrails.(g.2.1and2.3)
Left Side
Right Side
Top of Ladder View
S3
S3
 28  support@cedarsummitplay.com