Cedar Summit McKinley - Roof Assembly

51 support@cedarsummitplay.com
SIZE
SCALE:1:50
WEIGHT:
Details
SHEET 1 OF 6
REV.
DWG. NO.
SIZE
SCALE:1:50
WEIGHT:
Details
SHEET 1 OF 6
REV.
DWG. NO.
Fig. 24.1
2644
Fig. 24.2
Fig. 24.3
2639
2644
Hardware
A: Place (2644) Front Roof Panel against (2639) Back Roof Panel so the tops form a peak then tight to the
inside edge of the outside slats attach 1 Narrow Angle Bracket per slat with 2 (S0) #8 x 7/8” Truss Screws per
bracket. (g. 24.1 and 24.2)
B: Attach the third Narrow Angle Bracket centred on the middle slat with 2 (S0) #8 x 7/8” Truss Screws. (g.
24.1 and 24.3)
Step 24: Roof Assembly
Part 1
Other Parts
3 x Narrow Angle Bracket
6 x #8 x 7/8” Truss Screw
x 2
x 2 per
bracket
Narrow Angle
Bracket
Flush
Flush
Flush
Centred
Narrow Angle
Bracket
1 x Front Roof Panel 1-1/4 x 37 x 44”
1 x Back Roof Panel 1-1/4 x 36-3/4 x 44”
Wood Parts
2639
S0
S0
S0