Cedar Summit Paramount F25040 - Step 8: Install Tunnel Side Upper Jamb

50 support@cedarsummitplay.com
A: In the upper opening of the small fort End Wall place 1 (2602) Upper Jamb so it measures 17” to the inside of
each post then attach to (2769) Panel BT Frame and (2768) Panel Floor with 2 Jamb Mounts using 4 (S0) #8 x 7/8”
Truss Screws per mount. (g. 8.1, 8.2, 8.3 and 8.4). Note 1” measurement as noted in g. 8.4.
8 x #8 x 7/8” Truss Screw
Step 8: Install Tunnel Side Upper Jamb
1 x Upper Jamb 1-1/4 x 3 x 35-15/16”
2602
Wood Parts
Hardware
S0
2 x Jamb Mount
Other Parts
Jamb
Mount
S0
x 4 per
Jamb
Mount
Centred
Fig. 8.2
Outside View
Fig. 8.1
Fig. 8.3
Fig. 8.4
2768
End Wall
2602
2769
2768
17”
17”
S0
Jamb
Mount
x 4
2602
No more than 1”
2769
2602
2768
2769