Cedar dns 2 - Page 25

Page 25
DSP
AD/DA conversion
Resolution: 24-bit linear PCM
Sample rate (internal sync.): 48kHz
Sample rate (external sync.): 40kHz to 100kHz
DSP Processor
Type: Floating point
Resolution: 40-bit
Peak computation: 2.4 GFLOP/s
Sample rates: 44.1kHz, 48kHz, 96kHz
Power
Power input
Voltage: 8V to 17.5V (nominal 12V)
Connector: XLR4M (pin1 -, pin4 +)
Reverse polarity protection: Indenite
Over-voltage protection: Indenite, up to 50V
Power consumption (digital I/O): 3W typical
Power consumption (analog I/O): 4W typical
Max power consumption @ 12V: 4.5W (P48 off), 6W (P48 on)
Power adapter
Input voltage: 85VAC - 250VAC, 50 - 60Hz
Input power: <15W
Input connector: UK/US/EU
Output voltage: 12V
Output current: 1A (max.)
Output connector: XLR4F (pin1 -, pin4 +)
E&OE.
The Company reserves the right to change specications without notice.