Cedar dns 2 - Specification

Page 24
SPECIFICATION
Inputs
Line input
Connector: Balanced XLR3F
Impedance: 10kOhm
Nominal signal level (0dB gain): +4dBu
ADC line up (0dB gain): +4dBu : -20dBFS
Clipping level (0dB gain): +24dBu
Dynamic range (0dB gain): > 102dB (AES17 unweighted)
THD+N (0dB gain): < 0.005%
Gain range: -6dB to +54dB
Microphone input
Connector: Balanced XLR3F
Impedance: 2kOhm
Gain range: 18dB to 78dB
ADC line up (36dB gain): -32dBu : -20dBFS
Dynamic range (36dB gain): > 102dB (AES17 unweighted)
THD+N (36dB gain): < 0.005%
Phantom Power
Type: P48 (IEC61958)
Unloaded voltage: +48V ± 4V
Current available: 10mA per microphone
Short circuit protection: Indenite
Digital input
Connector: Balanced XLR3F
Format: AES3 (IEC60958) or AES11 (DARS)
Sample rate sync range: 40kHz to 100kHz
Outputs
Line output
Connector: Balanced XLR3M
Nominal signal level: +4dBu
DAC line up: -20dBFS : +4dBu
Maximum output: +24dBu
Dynamic range: > 102dB (AES17, unweighted)
THD+N: < 0.005%
Minimum load impedance: 600 Ohm
Short circuit protection: Indenite
Digital output
Connector: Balanced XLR3M
Format: AES3 (IEC60958)
Sample rate (internal sync): 48kHz (±50ppm)
Sample rate (external sync): locked to digital input