ceepo Mamba - Shifting Cable Routing; Front Derailleur Shifting Cable; Rear Derailleur Shifting Cable

Mamba
2019 Assembly Guide
A
B
4. Cables Map - Shiftings
Map Front Derailleur (mechanical)
Cable entry (1) is located on top of the down
tube. Thread the cable casing until you can
grab it at the bottom down tube exit (2), then
guide it toward front derailleur exit hole (3).
Map Rear Derailleur (mechanical)
Cable entry (1) is located on top of the down
tube. Thread the cable casing until you can
grab it at the bottom down tube exit (2), then
guide it toward rear derailleur exit hole (4)
Mechanical cable stoppers are assembled on
the frame already.
K
D
A
B
(2)
(4)
(1)
(3)
Use the Di2
cable stoppers
for an
electronic setup
7
2019