cefar Easy - 3. GETTING STARTED

3
GB
5. RAISE THE AMPLITUDE (INTENSITY OF THE STIMULATION)
Push the button until you reach a comfortable
level of stimulation. Always increase the amplitude
cautiously. To pause the program, lower the amplitude
to 0 with .
1. INSERT THE BATTERIES
Insert the batteries according to the picture.
2. ATTACH THE ELECTRODES
3. SWITCH THE STIMULATOR ON
Press the ON/OFF button . It can be used for
terminating the stimulation at all times, even when the
key lock is activated. Always switch off stimulation before
removing electrodes from the skin.
4. CHOOSE A PROGRAM
For further information on the programs, see
section 5.
BE SURE TO READ THE REST OF THE MANUAL TO FULLY BENEFIT FROM YOUR CEFAR EASY.
3. GETTING STARTED
PLEASE READ THE PRECAUTIONARY MEASURES - SECTION 12 - BEFORE USING THE CEFAR EASY.
A. Connect the electrodes to
the cable.
B. Attach the electrodes
to your body.
C. Connect the cable
to the CEFAR EASY.