Store the Scroll Saw Properly
WARNING. Always ensure that the saw is
switched off and the POWERhandle is detached
from the tool before disassembling the product.
General Inspection
Regularly check that all the fixing screws are
tight. They may vibrate loose over time.
1. open case lid, slide the internal plug away
from the jigsaw.
2. Put internal plug back into its storage area.
3. Slide back the product lock, and roll the jigsaw
away from the metal work surface finally
removing the bottom of the sole plate from the
lid pocket.
4. Re pack the tools into the lift out carry bag
before putting them back into the case for
storage.
NOTE: The Carry Bag and its tray inside are for
easy storage and protection of tools inside the
Case.
5. Disconnect the product from the mains power.
Scroll Saw - Maintenance
12.5
13. Table Light
To Next Page
Loading...
