Celcom PortaWiFi 2.0 - Connecting to Your Device; Using Wi-Fi

To Next Page

To Previous Page

Connecting to Your Device

Using Wi-Fi

1. Power on your device directly.

2. Make sure your computer or other client devices have

enabled Wi-Fi, and search for available wireless net-

works.

NOTE: Refer to your Wi-Fi-enabled client device manual

for further details on how to search for wireless networks.

If you use a computer, you need to set your computer to

obtain an IP address automatically.

3. Select the Wi-Fi name (SSID) of your device, and click

Connect.

NOTE:

Please check the label on your device to get the default

SSID.

4. Enter the Wi-Fi password if necessary, and click OK.

NOTE:

You may need to input the password for Wi-Fi connection.

Please check the label on your device to get the default.

5. Wait until the client device is connected to your device

successfully.