Celestron CPC 9.25 - Page 8

8
Centre the star in the nderscope.
Press ENTER when ready.
Star 2
Xxxxxx
Centre the star in the nderscope.
Press ENTER when ready.
Centre the star in the eyepiece.
Press ALIGN when ready.
Align Success
Now use the le/right &
up/down direcon keys (the
central four controller keys
with black triangles on them)
to move the telescope towards
the named star.
Once you get reasonably close
to the star, start looking
through the nderscope and
connue to move the
telescope up/down/le/right
unl you have the named star
under the nderscope
crosshairs. Then press ENTER.
You now repeat the process.
Inially align the second star.
Use the Up/Down keys if you
want to select a dierent star
to the one prompted by the
telescope.
Centre the second star in the
nderscope crosshairs and
then hit ENTER. Then centre
the star in the telescope
eyepiece and hit ALIGN.
If the telescope math
determines that you have
accurately aligned it on the
selected atars you will see the
message “Align Success”. You
are now ready to observe
objects.
Align Fail
If the alignment fails you need
to repeat the Two Star
Alignment procedure. Start by
clicking the UNDO buon a
coupole of mes to get back to
the CPC Ready message and
then repeat the procedure,
making sure you have aligned
the telescope on the correct
stars. Use your planetarium
app (SkySafari is
recommended) to help idenfy
the alignment stars correctly.