Cellebrite Phone Power-up Cable User Manual

For question, please contact us at support@cellebrite.com
For video tutorials, please visit: youtube.com/CellebriteUFED
Phone Power-up Cable – User Instructions
Overview
Cellebrite's "Phone Power-up Cable" is used to power up mobile
devices through a UFED or UFED TOUCH unit, during an extraction.
You will find it useful when:
 Extracting data from a phone with a drained battery
 Extracting data from a phone with a missing battery
 Extracting data from a phone without a charger
 Conducting a long extraction
Specification
The "Phone Power-up Cable" is made up of three joined cables:
"Data" cable
"Extra Power" cable
a cable that ends in 2 negative
black clip and a positive red clip
Usage
1. Remove the battery from the
phone and locate the positive and
negative terminals in the battery
housing.
You can sometimes find them
according to markings on the
phone.
2. If the battery contacts are not
clearly marked on the phone, use
the markings on the battery to
mark the terminals.
Place or flip the battery and place
it along the edge of the battery
housing.

Cellebrite Phone Power-up Cable Specifications

General

Brand	Cellebrite
Model	Phone Power-up Cable
Category	Cables and connectors
Language	English

Summary

Cellebrite Phone Power-up Cable User Guide

Product Overview

Explains the primary function and application of the Cellebrite Phone Power-up Cable for mobile data extraction.

Technical Specifications

Details the physical composition of the power-up cable, noting its three joined cable segments.

Step-by-Step Usage Instructions

Guides users through the process of connecting the cable to a mobile device and UFED unit for data extraction.