How to use the product:
1. Turn on the product : after connecting to the power supply,
press the "on / off /wind speed key” on the control panel to start
operation, and the machine runs in "Low wind speed mode" by
default and its indicator light on.
2. Select the wind speed : Follow to Step 1 to turn on the product, press the”on/off / wind
speed” key again to switch to``high-wind speed mode operation. If you continue to
press the``on/off /wind speed” key again , the product will turn it off and its indicator
goes off.
3. Filter replacement reminder signal: machine runs 1500 hours
in total, the "on / off/ wind speed " key indicator will keep
flicker as alarm signal ( Di Di sound will keep ringing ),
prompting users to replace the filter. After replacing the filter,
press and hold the "on / off / wind speed" key for 5 seconds
to reset, and the machine enters recounting cycle of the new
filter replacement timing cycle.
Fragrant Air function
Please make sure the power is disconnected, remove the base cover and add few drops of
essential oil in the cotton. Install the base cover and start the operation, bring the fragrant
air in the indoor environment
To Next Page
Loading...