BIO X6 User Manual v. 1.0 59
5. Camera tool: Tap to enable or disable the Camera tool. If enabled, the tool must be
coupled to one of the intelligent connectors on the BIO X 6.
6. Printbed temperature control: Tap to enable or disable temperature control on the
printbed. If disabled, the printbed will be kept at room temperature.
7. Travel settings: Tap to change the speed of the travelling movement. This feature is
mainly for speeding up prints by performing the non-print movements faster, for
example when the printhead moves from one well to another.
To Next Page
Loading...
