TECHNICAL SPECIFICATIONS
Model No: CELCT180
Power Supply: 230-240V, 50Hz
Power: 2000W
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase.
CLEANING YOUR HEATER
The heater requires regular cleaning to ensure trouble free operation:
• Unplug the heater from the mains supply before cleaning.
• Ensure that the heater has been allowed to cool down completely before cleaning.
• Use a damp cloth (not wet) to wipe the exterior of the heater to remove dust and dirt.
• Use a vacuum cleaner to remove dust and fluff from around the grills.
• Never use solutions such as benzene, thinners or polishing agents.
• Ensure the heater is dry before plugging back into the mains supply.
IMPORTANT! NEVER COVER THIS HEATER!
SUPPORT AND TECHNICAL ADVICE
North Shore City, Auckland, New Zealand
Monday – Friday 8am-5pm
Phone: 0800 232 633
Website: www.celsius.co.nz
SAFETY DEVICE
This appliance has three protection devices:
The first device will automatically turn the appliance off if the appliance is not in the appropriate operating
position.
The second device, automatically disconnects & reconnects the appliance at a preset temperature.
The third device disconnects the appliance permanently in case of overheating, by means of a thermal fuse.
(It is non resettable)
To Next Page
Loading...
