EasyManua.ls Logo

Celsius CELECOOLER - Cleaning Instructions; Routine and Long-Term Cleaning; Filter and Water Curtain Maintenance

Celsius CELECOOLER
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning
To avoid risk of electric shock, before
cleaning, you MUST ALWAYS switch off
and unplug the Fan before cleaning.
Use only a soft, damp cloth to gently wipe
the Fan and dry well.
DO NOT immerse the Fan in water and
never allow water to enter the motor
housing.
DO NOT use harsh chemicals to clean the
Fan.
If the cooler is not to be used for a long
time, the water tank should be drained out
and cleaned, then operate the cooler at
normal temperature (not cooling) for a
period until the inside of the cooler,
especially the strainer, is entirely dry.
It is advisable to clean the filter and water
curtain once every two weeks. To do this;
disconnect the power supply, lift out the
filter and water curtain, clean them both
and then replace to their original place.
TECHNICAL SPECIFICATION
Model No: CELECOOLER
Power Supply: 230V / 50Hz
Power: 65W
SUPPORT AND TECHNICAL ADVICE
PO Box 100707, NSMC, Auckland, New Zealand
Monday Friday 8am-5pm
Phone: 0800 232 633
Website: www.celsius.co.nz
General care and safety guide
NEVER
˟ Never use this appliance in the immediate
surrounds of a bath, a shower, or a
swimming pool or other liquids. The
appliance must not be immersed in any
liquids.
˟ Due to the risk of injury, never use this
appliance for any purpose other than its
intended use. This appliance is intended for
use in household and similar applications
such as staff kitchen areas in shops, offices
and other working environments; farm
houses, by clients in hotels, motels and other
residential type environments, bed and
breakfast type environments
˟ Never use this appliance outdoors.
˟ The use of an extension cord, power
board, or external timer is not recommended
with this unit.
˟ Never operate the appliance with a
damaged cord or plug, after it malfunctions,
or if it has been damaged in any manner.
Have the appliance checked and repaired by
a qualified electrician if repair is necessary. If
the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order to
avoid a hazard.
˟ This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities or
lack of experience and knowledge, unless
they are supervised or have been given
instruction concerning the use of the Fan by
a person responsible for their safety.
˟ Never touch blades while the machine is
plugged in.