EasyManuals Logo

CEN-TECH 38391 User Manual

CEN-TECH 38391
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Page 4 For technical questions, please call 1-800-444-3353. Item 38391
SAFETY OPERATION MAINTENANCEASSEMBLY
Service
Have your Power Pack serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the Power Pack is maintained.
Power Pack Safety Warnings
1. Lead-acid batteries generate hydrogen gas when
charging. Hydrogen gas is explosive. Only use
the Jump-Start system in a well-ventilated area.
2. Jump-Starting A Vehicle
a. Use the Power Pack for jump-starting
a LEAD-ACID battery only.
b. For emergency use only. Do not use the Power
Pack as a replacement for a vehicle battery.
c. Be sure area around battery is well ventilated
while battery is being jump-started.
d. NEVER jump-start a frozen battery.
e. Do not attempt to jump-start a vehicle with
a non-rechargeable or defective battery.
f. Study all battery manufacturers specific
precautions for jump-starting.
g. DO NOT TOUCH POSITIVE AND NEGATIVE
BATTERY CLAMPS TOGETHER.
h. Unplug the Power Pack from its Adapter
before connecting its cables to a battery.
i. Connect and disconnect battery cable
clamps only after setting any Jump-
Starter switches to OFF position.
j. Connect cables to proper polarities. Connect
black cable to negative body ground and
red cable to positive battery terminal.
k. Locate Power Pack as far away from
battery as battery cables permit.
3. Maintain labels and nameplates on the Power Pack.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
4. WARNING: This product contains lead, which is a
chemical known to the State of California to cause
cancer and birth defects or other reproductive harm.
(California Health & Safety Code § 25249.5, et seq.)
5. WARNING: This product contains or, when
used, produces a chemical known to the
State of California to cause cancer and birth
defects or other reproductive harm. (California
Health & Safety Code § 25249.5, et seq.)
6. WARNING: Handling the cord on this product will
expose you to lead, a chemical known to the State of
California to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
(California Health & Safety Code § 25249.5, et seq.)
7. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
SAVE THESE INSTRUCTIONS.
Specifications
Cold Cranking Amps 400
Peak Amps 900
Battery 12V, 17Ah, Sealed Lead-Acid
Battery Cables 17″ L
Functions: 12 Volt Jump-Starter,
12VDC Power Supply, and Work Light

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CEN-TECH 38391 and is the answer not in the manual?

CEN-TECH 38391 Specifications

General IconGeneral
BrandCEN-TECH
Model38391
CategoryPower Pack
LanguageEnglish

Related product manuals