Page 2 For technical questions, please call 1-888-866-5797. Item 37772 61593
SAFETY OPERATION MAINTENANCESETUP
Table of Contents
Safety ..........................................2
Specifications ..............................6
Setup ...........................................5
Operation .....................................7
Maintenance ............................... 11
Warranty .....................................12
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
IMPORTANT SAFETY INFORMATION
Safety Warnings and Precaustions
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
1. Electrical shock can cause death
or injury! NEVER TOUCH exposed
conductors of electricity.
2. Inspect the Multimeter before
use. In addition to a general
inspection, look specifically for:
a. Pay special attention to the
insulation protecting the connectors.
b. Check the leads for exposed metal,
damaged insulation, and continuity.
c. Replace damaged test lead
immediately, before use.
3. Do not use the multimeter if:
a. The test lead is damaged
in any way.
b. The battery is low.
c. Near any explosive
gasses or fumes.
To Next Page
Loading...
Need help?
General
