CEN-TECH 98025 User Manual

SEVEN FUNCTION DIGITAL
MULTIMETER
98025
SET UP AND OPERATING INSTRUCTIONS
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2008 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any
artwork contained herein may be reproduced in any shape or form without the express written
consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described
herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.

CEN-TECH 98025 Specifications

General

Display	LCD
Max Current (DC)	10A
Resistance Measurement	Yes
Diode Test	Yes
Continuity Test	Yes
Continuity Buzzer	Yes
Battery Test	Yes
Battery Type	9V
Display Digits	3.5
Capacitance Measurement	No
Frequency Measurement	No
Type	Digital
DC Voltage Range	200mV, 2V, 20V, 200V
AC Voltage Range	200V
DC Current Range	200μA, 20mA, 200mA, 10A
Resistance Range	200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ

Summary

Important Safety Information

General Safety Rules

Key safety rules for operating the multimeter, including inspection and usage precautions.

Unpacking

Operating Instructions

AC Voltage Measurements

Steps to measure AC voltage using the multimeter, including range selection and probe connection.

DC Voltage Measurements

Procedure for measuring DC voltage with the multimeter, covering range selection and connection.

DC Current Measurements

Instructions for measuring DC current up to 10 amps, including lead placement and range selection.

Resistance Measurements

Transistor (hFE) Measurements

Diode Measurement

Battery Charge Measurement

Cleaning, Maintenance, and Lubrication

Limited 90 Day Warranty