EasyManua.ls Logo

CEN-TECH 67855 - Specifications; Input and Output Details; Extension Cord Wire Size Recommendations; Important Safety Instructions

CEN-TECH 67855
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 2 For technical questions, please call 1-800-444-3353. SKU 67855
SPECIFICATIONS
Input 120 V~, 60 Hz
Output
Power
2/10/ 40 A @ 12VDC*
40 A @ 6VDC (Continuous)
100 A @ 3.5VDC (Intermittent)
200 A @ 7VDC (Intermittent)
Time 3 Hours
Power Cord 6’ - 6” (79”) L
*Amperage is only present when the unit is connected to a battery or in START mode.
NOTE: Some newer vehicles with onboard computers may be damaged during use.
Read the vehicle owners manual before starting vehicles with weak batteries.
IMPORTANT SAFEGUARDS
IMPORTANT SAFETY INSTRUCTIONS
1. SAVE THESE INSTRUCTIONS” - This manual contains important safety and
operating instructions.
Do not expose charger to rain or snow.2.
Use of an attachment not recommended in this manual may result in a risk of re, 3.
electric shock, or injury to persons.
To reduce risk of damage to electric plug and cord, pull by plug rather than cord 4.
when disconnecting charger. An extension cord should not be used.
Use of improper extension cord could result in a risk of re and electric shock. If 5.
extension cord must be used, make sure:
That pins on plug of extension cord are the same number, size, and shape as a.
those of plug on charger.
That extension cord is properly wired and in good electrical condition.b.
That wire size is large enough for AC ampere rating of charger.c.
MINIMUM AWG WIRE SIZE FOR EXTENSION CORDS FOR THIS BATTERY CHARGER
AC input Length of cord, m
Current I, A AWG size of cord
25 50 100 150
0 < I < 2 18 18 18 16
2 < I < 3 18 18 16 14
3 < I < 4 18 18 16 14
4 < I < 5 18 18 14 12
5 < I < 6 18 16 14 12
6 < I < 8 18 16 12 10
8 < I < 10 18 14 12 10
10 < I < 12 16 14 10 8
12 < I < 14 16 12 10 8
14 < I < 16 16 12 10 8