Page 3For technical questions, please call 1-800-444-3353.SKU 96451
5. Do not use the tool if the Trigger does
not turn it on and off. Any tool that cannot
be controlled with the Trigger is
dangerous and must be repaired.
6. Disconnect the battery before making
any adjustments, changing accessories,
or storing the tool. Such preventive
safety measures reduce the risk of
activating the Laser accidentally.
7. Maintain the tool. Check for misalignment
or binding of parts, breakage of parts and
any other condition that may affect the
tool’s operation. If damaged, have the
tool repaired before use. Many accidents
are caused by poorly maintained tools.
8. Use the tool in accordance with these
instructions, taking into account the
working conditions and the work
to be performed. Use of the tool for
operations different from those intended
could result in a hazardous situation.
9. Have your tool serviced by a qualied
repair person using only identical
replacement parts. This will ensure that
the safety of the tool is maintained.
10. Do not open the housing other
than battery compartment.
11. Maintain labels and nameplates on the tool.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
12. This product is not a toy.
Keep it out of reach of children.
13. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by
the operator that common sense and caution
are factors which cannot be built into this
product, but must be supplied by the operator.
SAVE THESE
INSTRUCTIONS.
To Next Page
Loading...
Need help?
General
