Page 5For technical questions, please call 1-800-444-3353.SKU 96451
Maintenance and Servicing
Procedures not specically explained
in this manual must be performed
only by a qualied technician.
TO PREVENT SERIOUS INJURY
FROM ACCIDENTAL OPERATION:
Release the Trigger and remove the
Battery before performing any inspection,
maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY
FROM TOOL FAILURE:
Do not use damaged equipment.
If abnormal noise or vibration occurs, have
the problem corrected before further use.
Cleaning, Maintenance,
and Lubrication
1. BEFORE EACH USE, inspect the general
condition of the Thermometer. Check for
loose hardware, misalignment or binding of
parts, cracked or broken parts, damaged
electrical wiring, and any other condition
that may affect its safe operation.
2. AFTER USE, wipe external surfaces
of the tool with clean cloth.
To Next Page
Loading...
Need help?
General
