CEN-TECH Caliper 98851 User Manual

®
CALIPER - 6” DIGITAL
Model
98851
SET UP AND OPERATING INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright® 2008 by Harbor Freight Tools®. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
!

CEN-TECH Caliper 98851 Specifications

General

Type	Digital Caliper
Display	LCD
Material	Stainless Steel
Auto-off Feature	Yes
Measurement Range	0-6 inches (0-150 mm)
Resolution	0.0005 inches (0.01 mm)
Accuracy	±0.001 in / 0.02 mm
Battery Type	SR44
Functions	Inch/mm Conversion

Summary

Setup and Operating Instructions

Save This Manual

Important Safety Information

Safety Alert Symbol Explanation

Explains the safety alert symbol used to warn of potential personal injury hazards.

Safety Hazard Levels

Defines hazard levels (Danger, Warning, Caution) and their implications for personal injury.

Non-Injury Practice Notices

Defines 'Notice' and 'Caution' for practices not related to personal injury.

General and Specific Safety Rules

Work Area Safety Guidelines

Guidelines for maintaining a safe work area, including child safety, lighting, and tool modification.

Service and Maintenance

Product Specifications

Operating Instructions

Measuring the Outside of an Object

Step-by-step guide for measuring the external dimensions of an object using the caliper.

Measuring the Inside of an Object

Instructions on how to measure internal dimensions using the caliper's inner jaws.

Measuring Depth

Procedure for measuring the depth of an object using the depth tab.

Measuring a Step

Steps to measure the height of a step using the caliper's outer jaws.

Unpacking and Initial Check

Replacing the Battery

Cleaning and Maintenance

Limited 90 Day Warranty