Page 15For technical questions, please call 1-888-866-5797.Item 59410
SAFETYOPERATIONMAINTENANCE SETUP
Battery Replacement
If the symbol appears on the LCD
display, the battery should be replaced.
1. Remove Test Leads from the Meter.
2. Turn the unit over.
3. Remove the protective case.
4. Remove screw on battery cover.
5. Remove battery cover carefully.
6. Pull batteries out of unit and
replace with the same.
7. Replace cover and retighten screw.
Calibration
Have the Meter calibrated by a qualified technician every year to maintain accuracy.
To Next Page
Loading...
