Page 8 For technical questions, please call 1-888-866-5797. Item 59410
SAFETY OPERATION MAINTENANCESETUP
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Electrical shock can cause death or injury! NEVER TOUCH
exposed conductors of electricity.
General Operating Instructions
Data Hold/Select
• To freeze the LCD meter reading,
press the HOLD/SELECT button.
• While data hold is active, the HOLD
display icon appears on the LCD.
• Press the HOLD/SELECT Button
again to return to normal operation.
Relative Button
In Capacitance Mode, press the REL
Button to zero out the Multimeter prior
to touching Probes to Capacitor.
Backlight Button
Press the BACKLIGHT button to
turn on the Backlight, press the
button again to turn Backlight off.
Note: Frequent use of the backlight will
shorten the life of the batteries. Only
use the backlight when necessary.
Auto Power Off
If Meter is not used for approximately 15 minutes, it will automatically turn itself
off to conserve battery power. To turn Meter back on after auto off, press any
button or turn the Rotary Dial. To disable Auto Power Off, hold the Hold/Select
Button when turning the Multimeter on, the APO screen display will disappear.
To Next Page
Loading...
Need help?
General
