Page 12
Your new mixer will provide years of uninterrupted service, but only if you do the following.
Installation
• Do not use an extension cord to connect electrical power.
Operation
• Turn off the mixer prior to changing speeds.
• Follow the capacity chart on page 13, especially for mixing dough.
• If the unit shuts off during mixing (overload protection trips), reduce the batch size.
Maintenance
• Add only 2 pumps of grease to the planetary grease tting once a year.
Important Points
Recommended Maintenance
PART REQUIRED ACTION FREQUENCY
Planetary Ring Reapply grease (e.g. black axle grease). Once a year.
Inject grease (2 pumps only) into zerk tting
on the side of planetary. DO NOT over ll!
Bowl Slide Rods Apply oil (mineral oil) on the bowl slide rods. If the bowl becomes difcult to
Raise and lower the bowl to distribute the oil onto raise or lower.
the rods.
Gear Oil Meter Contact an authorized servicer to change the Once a year. When the gear oil
gear oil. meter shows the oil being below
half of the circle.
To Next Page
Loading...