To Next PageTo Next Page
Need help?Do you have a question about the Centek Air CT-65BDC07 and is the answer not in the manual?
Allows operation without the remote control by pressing a button on the unit.
Details on using the remote control, accessible via QR code scan.
Checks for power supply issues, safety device, and turn-on delay timer.
Addresses interference, signal coverage, batteries, and RC unit damage.
Checks settings, unit blockage, filter, contamination, and fan speed.
Notes that mode changes may take up to 3 minutes.
Explains a 2-5 minute delay for heating due to exchanger warm-up.
Addresses smells from room contents or persistent odors requiring service.
Identifies refrigerant flow and evaporator boiling as the cause, not a malfunction.
Attributes crackling to temperature expansion/contraction of the front panel.
Notes noise occurs when the indoor unit fan turns on and off.
Attributes hissing to refrigerant flow direction changes, not a malfunction.
Explains discoloration from UV radiation or temperature, not affecting function.
Explains fog formation due to high indoor humidity and temperature.
Identifies condensate formation during heating or defrosting modes.
Guidelines for choosing a suitable location for the outdoor unit to ensure proper operation.
Guidelines for choosing a suitable location for the indoor unit for optimal performance.
Instructions for drilling the wall hole for unit installation, checking for obstructions.
Procedures for connecting electrical cables, including refrigerant tube flaring and connection.
General| Brand | Centek |
|---|---|
| Model | Air CT-65BDC07 |
| Category | Air Conditioner |
| Language | English |
