Center 384 - Installing Batteries; Getting Started

Hydrogen (H2) Gas Leak Detector
8
6. GETTING STARTED
6-1 Installing Batteries
 Loose the screw and remove the battery
compartment door located on the bottom of the
instrument as show below (Fig.1).
 Install 4 “AA” size alkaline batteries.
 Reinstall the battery cover by aligning it with the
handle.
When the batteries are nearing the end of their useful
life, the Red LED Low Battery indicator illuminates. The
batteries should be replaced as quickly as possible.
4 “AA” size
alkaline batteries
Fig.1